ELIMINATOR PC407 "FERPRO" Power Flushing Pump, Mobile. 40L Tank, Output 380W, 90L/min, 2 bar.#

Cleaning unit ELIMINATOR PC407 effectively cleans and eliminates mineral deposits, corrosion deposits from heating, air-conditioning, cooling, solar systems - HVAC. It can also be used for cleaning fittings - heat exchangers, heaters, radiators and industrial machines such as injection moulding machines, extruders, etc.

SPECIAL FEATURES
- The special connection panel with cleaning and hydraulic unit facilitates the connection of hoses (Camlock quick couplings) and the operation of the unit's functions during the cleaning process.
- The entire cleaning cycle of the system - i.e. draining, rinsing, chemical cleaning, refilling with water, even with inhibitor - requires only a single connection of 4 hoses.
- High efficiency - the unit can be used to clean water deposits of up to 0,3m3 / ca. 350m2 of heated surface.
- The design of the unit allows for cleaning the installation in the most efficient way (reversible and possibility of connecting e.g. a magnetic filter), filling the installation while the pump is running, rinsing/ emptying the installation.
- The 40 litre tank made of durable plastic can be used with any cleaning and decalcification agent, including strong acids and alkalis.
- Temporary and permanent reversal of flow direction possible via reversing valve. Increased cleaning efficiency.
- Hoses and fittings included for easy connection.
- Built-in high capacity self-priming pump with high power motor and vertical axis to clean equipment with large quantities of mineral deposits (scale), sludge and rust deposits.
- Built-in swivel castors provide full mobility of the unit - filled or empty.

TECHNICAL SPECIFICATIONS
Model: PC407 ELIMINATOR
Brand: FERPRO
Series: WATERMAX Model 2021
Application: Cleaning of heating systems, HVAC, sanitary fittings, etc.
Capacity: ≈ 0.25-0.30 m3 water discharge, 25-30 radiators, 350m2 heated area, 2-3 levels
Tank: 40 L, transparent, HDPE
Motor: 0,5 KM / 370W, IP54, 230 V
Max flow rate: 90 L/min
Max Head: 20 m
Max. working temperature: 50 st C
Reversing type: manual, immediate
Re-circulation valves: 2 x 3-way shut-off and drain valves
Pump dimensions mm: 390 x 440 x 690
Weight of pump: 14 kg / with hoses 20 kg
Mobility / handling: 50 mm castors, built-in handle
Application of preparations: Available-alkali, acid, chlorine

INCLUDED:
Circulation hoses: 2 x 3m, diameter 3/4", reinforced PVC, 1 x Camlock quick coupling C75 / 1 x coupling GW3/4"
Drain hose: 8m, 3/4", PVC, 1 x Camlock C75 quick release coupling
Supply hose: 6m, 1x coupling, 1 x GW 1/2"-3/4"
Adapters: Not included.
Cleaning solution: 1 litre DS-50 (FD207)
Tester: Ph indicator, 100 measurements, rinse accuracy test (FP104)
Information: Operating instructions

RECOMMENDED CLEANING SOLUTIONS

Cleaning of heating installations, air-conditioning; DS-50
Cleaning of "damaged" heating systems; DS-15
Cleaning of water supply systems etc; DS-30
Always protect the system after cleaning with an inhibitor; System Guard

Guides
Guidebook on cleaning central heating installations

Cleaning devices - Catalogues and brochures
https://drive.google.com/open?id=1pA63JYHTDOUZZLcudptprtOykGNsUn0N

WHY SHOULD CENTRAL HEATING SYSTEMS BE CLEANED?
In the era of seeking savings, an increasing number of property managers, housing communities and cooperatives decide to carry out thermomodernization. This term means not only insulating the building or replacing windows with modern and tight ones, but also - which is often much more important - modernisation of the existing central heating installation, i.e. its chemical cleaning and protection with an inhibitor against the renewed formation of rust and deposits. Another reason for modernisation of the central heating system is the failure of the system, e.g. underheating of radiators, blockage of risers or pipes, aeration of the system. It is also mandatory to clean the system before installing a new boiler or replacing radiators.
Limescale, sludge and rust are the greatest enemies of installations. After several years of use, a chemical cleaning operation is necessary in most multi-family buildings or housing estates. This is due to the quality of the water and, unfortunately, pseudo-savings, typical of the Polish reality, which already at the installation stage and later in the operation of the installation lead to severe contamination resulting in a loss of efficiency of the installation of up to 30% or more. This often results from design errors, lack of specialised filters and purifiers and, most importantly, use of untreated water (i.e. without corrosion inhibitors).
Chemical cleaning allows existing installations to be unblocked and restored to maximum efficiency. The whole process (depending on the size of the building and thus the central heating system, type of preparation used and the selected cleaning method) lasts from two/three days (using a cleaning pump) to several days (on-line cleaning during the system operation). After the cleaning process, it is necessary to protect the installation with a corrosion inhibitor, because the process of rusting and "overgrowing" of the installation will continue. It should be remembered that the term "corrosion inhibitor" is generally applied to describe a preparation that not only prevents corrosion, but also prevents deposits and bacteriological contamination. Such properties are possessed by CH-3 and CH-33 "FERPRO" preparations.

Status as of 01.2020,

All technical data are given to the best knowledge of the manufacturer on the date of publication. Subject to design changes to improve the operation of the equipment.

There are currently no product reviews.

The owner of the online store does not guarantee that the published opinions come from consumers who have used or purchased a given product.