FD095 FERMAG 3/4" Magnetic-Separator Filter for CH 28kW with Wall Boilers. 9000Gs Megnetizer FERDOM

- Water inlets positioned at an angle of 90 degrees. A typical arrangement for connecting a wall hung boiler to the central heating system. A total of 4 options for connecting the filter to the system - two at an angle of 90 degrees (recommended !!) and two at an angle of 180 degrees.

- Magnetic impurities are trapped by a strong neodymium magnet with a power of 9 000Gs and magnet surface area of 45cm2. Such impurities may cause pumps and valves to seize, they reduce heat transfer through radiators

- Non-magnetic impurities are trapped by an effective stainless steel mesh filter with 500 microns and 75cm2 surface area. This type of impurities (mineral deposits) block heat exchangers, clog pipes and reduce system efficiency.

- FD095 filter has a very durable polyamide PA66 GF30 housing, metal lid and magnet sleeve. Most central heating boiler manufacturers recommend installing a magnetic filter with a new central heating boiler.

- Recommended application for domestic central heating systems Recommended application for domestic central heating systems with a wall-hung boiler - thanks to the construction and functions of the filter and its small size. Can also be used for solar systems, HVAC.

FERMAG FD095 Magnetic filter-separator for central heating systems with wall hung boilers. 3/4". FERDOM Magnetizer.

- Most currently manufactured boilers, in order to achieve the highest possible efficiency, have very narrow water channels.
- Thanks to the use of the FERMAG FD095 filter, maintenance costs and the cost of spare parts are reduced by fewer failures.
- Most European manufacturers of central heating boilers currently recommend the installation of the Magnetic Filter together with a new central heating boiler.
- To increase the efficiency of the magnetic filter we recommend the use of Filter Fluid FD678 penetrating fluid.

Installation and operation
- The filter should be installed under the boiler on the water return.
- Recommended installation - body in horizontal position, connections at 90 degrees = flushing the filter by unscrewing the cap.
- The cyclic filter cleaning process (at least once a year) consists in:
(a) Switching off the boiler, closing the filter valve (on the return) and the valve on the boiler supply.
c) Removing the magnet from the chamber - magnetic deposits fall into the casing.
d) Unscrewing and removing the magnet lid and sleeve together with the mesh filter.
e) Thoroughly wash the filter and remove sediment and deposits.
d) Once the cleaning is complete, follow the steps in reverse order.
f) Finally, check the tightness of the cover and vent the filter.

Technical data
Product: FERMAG FD095 Magnetic filter-separator for central heating
Model / manufacturer: FD095 / FERDOM
Application:
- For: domestic central heating, solar systems, small refrigeration and air conditioning systems
- Primary: capturing ferromagnetic impurities
- Additional: capturing other impurities and sludge
Neodymium magnet: Nominal power 9,000 Gs, area 45cm2
Magnet mounting type: In a sealed brass chamber.
Separator-separator type: Stainless steel mesh filter, micron rating 500µm, area.75cm2
Max power of central heating system: 24-28 kW
Housing material: PA66G30, polyamide with 30% glass fibre.
Metal parts: lid, magnet sleeve brass CuZn42Pb3
Filter size: 80mm / 133mm - Without valves, screw, plug.
Included: Body (housing), screw connection, valve, plug/air vent, spanner for lid.
Weight/with packaging: 700 grams / 900 grams
Water connections / spigots: All 3 3/4 "water connections are interchangeable.
Water connection options: 4
Working temperature range: 0-90 degrees C
Max working pressure: 3 bar
Medium: Water, glycol solutions
Max. concentration of glycol in the reservoir: 30%
Place of installation: On the return from the bottom of the central heating boiler.

Why install a Magnetic Separator?
Central heating radiators are usually made of mild steel, which is highly susceptible to corrosion. Even with a high quality corrosion inhibitor installed some level of corrosion can occur, cleaned without an inhibitor the level of corrosion is many times greater. In a central heating system in the absence of air, black magnetite is usually formed, which is magnetic in nature and can therefore be captured with a magnet.
Although magnetite is seven times heavier than water and normally falls to the bottom of the radiator from which it originates, some particles are dispersed into the system by the flow. If a magnetic filter fails to collect these particles, they will end up in the next electromagnetic device; such as a circulation pump, and cause premature wear. They also get into other parts of the installation such as valves, heat exchangers, etc. causing clogging and reducing the thermal efficiency of the system.
An additional built-in function of the device is a separator/settler for non-magnetic impurities. Such impurities (boiler scale) block heat exchangers, lead to overheating of the boiler, clog pipes and reduce the efficiency of the entire system.

Technical and installation information

https://drive.google.com/drive/folders/0BzFhFKO87oADNmFWOGJpNlNPc2s?resourcekey=0-POhtJpNXYxrppOJtXe3ufw&usp=sharing

There are currently no product reviews.

The owner of the online store does not guarantee that the published opinions come from consumers who have used or purchased a given product.