0.00 EUR
Front pageMAGNETIC Filters for C.H., HVAC, SolarsFD110 STRONG 3/4" Magnetic-Separator Filter for CH, Brass Body. 9000Gs. Max.28kW. Magnetizer.

FD110 STRONG 3/4" Magnetic-Separator Filter for CH, Brass Body. 9000Gs. Max.28kW. Magnetizer.

Without Tax: 51.01 EUR
With Tax: 62.74 EUR
(1 szt. = 62.74 EUR)
Manufacturer: FERDOM
Model: FD110
EAN: 5904044120081
Shipment:24 hours
Product avaliable (312 )
Weight:1.00 kg
Check shipping costs

Shipping of this product

Quantity:szt.

FD110 "STRONG" Magnetic filter-separator for syst. Central heating system with wall hung boiler-3/4". FERDOM magnetiser.
Lifetime warranty on the body.

- Water inlets arranged at an angle of 90 degrees. A typical arrangement for connecting a wall hung boiler to the central heating system. A total of 4 options for connecting the filter to the system - two at 90 degrees, two at 180 degrees.

- Magnetic impurities are trapped by a strong neodymium magnet with a power of 9 000Gs and a magnet surface area of 30cm2. Such impurities may cause pumps and valves to seize, reduce heat transfer through radiators

- Non-magnetic impurities are trapped by an effective stainless steel mesh filter with 500 microns and surface area of 85cm2. Such impurities (mineral deposits) block heat exchangers, clog pipes and reduce system efficiency.

- Filter FD110 has a very durable metal casing, metal lid and magnet sleeve. Most central heating boiler manufacturers recommend the installation of a magnetic filter with a new central heating boiler.

- Recommended application for domestic central heating systems with boilers. Recommended application for domestic central heating systems with a wall-hung boiler - thanks to the construction and functions of the filter and its small size. Can also be used for solar systems, HVAC.

FERMAG FD110 "STRONG" Magnetic Separator Filter for domestic central heating systems with wall hung boilers. 3/4". FERDOM Magnetizer.

- Most boilers manufactured today, in order to achieve the highest possible efficiency, have very narrow water channels.
- Thanks to the application of the FERMAG FD110 filter, maintenance costs and the cost of spare parts are reduced by fewer failures.
- Most European manufacturers of central heating boilers currently recommend the installation of the Magnetic Filter together with a new central heating boiler.
- To increase the efficiency of the magnetic filter we recommend the use of Filter Fluid FD678 penetrating fluid.

Installation and operation
- The filter should be installed under the boiler on the return.
- The cyclic cleaning process of the filter (at least once a year) consists in:
(a) Switching off the boiler, closing the filter valve (on the return) and the valve on the boiler supply.
c) Removing the magnet from the chamber - magnetic deposits fall into the casing.
d) Unscrewing and removing the magnet lid and sleeve together with the mesh filter.
e) Thoroughly wash the filter and remove sediment and deposits.
d) Once the cleaning is complete, follow the steps in reverse order.
f) Finally, check the tightness of the cover and vent the filter. and failure of the boiler not covered by the warranty service.

Technical data
Product: FERMAG FD110 magnetic filter-separator for central heating systems
Model / manufacturer: FD110 / FERDOM
Application:
- For: domestic central heating, solar systems, small refrigeration and air conditioning systems
- Primary: capturing ferromagnetic impurities
- Additional: capturing other impurities and sludge
Neodymium magnet: Nominal power 9,000 Gs. Surface area 30cm2
Magnet mounting type: In a sealed brass chamber.
Separator-separator type: Stainless steel mesh filter, micron rating 500µm, area 85cm2
Max power of central heating system: 20-24 kW
Housing material: Nickel-plated brass - CuZn42Pb3
Metal parts: lid, magnet sleeve - brass CuZn42Pb3
Filter size: Without valves, screw, plug - 80mm / 130mm
Included: Body (housing), screwing, valve, plug/air vent, spanner for lid.
Weight/with packaging: 760 grams / 1000 grams
Water connections / spigots: All 3 3/4" water connections are interchangeable.
Water connection options: 4
Working temperature range: 0-90 deg C
Max working pressure: 3 bar
Medium: Water, glycol solutions
Max. concentration of glycol in the reservoir: 30%
Place of installation: On the return from the bottom of the central heating boiler.

Technical information download
https://drive.google.com/drive/folders/0BzFhFKO87oADNmFWOGJpNlNPc2s?resourcekey=0-POhtJpNXYxrppOJtXe3ufw&usp=sharing

Why install a Magnetic Separator?
Central heating radiators are usually made of mild steel, which is highly susceptible to corrosion. Even with a high quality corrosion inhibitor installed there may be some level of corrosion, cleaned without an inhibitor the level of corrosion is many times greater. In a central heating system in the absence of air, black magnetite is usually formed, which is magnetic in nature and can therefore be captured with a magnet.
Although magnetite is seven times heavier than water and normally falls to the bottom of the radiator from which it originates, some particles are dispersed into the system by the flow. If a magnetic filter fails to collect these particles, they will end up in the next electromagnetic device; such as a circulation pump, and cause premature wear. They also get into other parts of the installation such as valves, heat exchangers, etc. causing clogging and reducing the thermal efficiency of the system.
An additional built-in function of the device is a separator/settler for non-magnetic impurities. Impurities of this type (so-called boiler scale) block heat exchangers, lead to overheating of the boiler, clog pipes and reduce the efficiency of the entire system.

There are currently no product reviews.

Write Review

The owner of the online store does not guarantee that the published opinions come from consumers who have used or purchased a given product.

Customers who bought this product also purchased
  • FD504 AirForce Kit FERDOM Sprayer + 1 L Combustion chamber cleaner for condensing boilers
    Quick view

    FD504 AirForce Kit "FERDOM" Sprayer + 1 L Combustion chamber cleaner for condensing boilers

    Without Tax: 56.68 EUR
    With Tax: 69.71 EUR

  • pH TEST METER, Colourimetric From 1-14pH. Spool of 5 metres or 100 Test Strips
    Quick view

    pH TEST METER, Colourimetric From 1-14pH. Spool of 5 metres or 100 Test Strips

    Without Tax: 5.48 EUR
    With Tax: 6.74 EUR

  • MAGNETIC FILTER FLUID 1L Solution to Increase Efficiency of the Magnetic Filter in Heating System
    Quick view

    MAGNETIC FILTER FLUID 1L Solution to Increase Efficiency of the Magnetic Filter in Heating System

    Without Tax: 14.93 EUR
    With Tax: 18.36 EUR

  • FD088 EASY-MAG  Magnetic Filter 3/4+Big Separator 500μm. Easy Service. CH 24kW.Brass/ABS
    Quick view

    FD088 "EASY-MAG" Magnetic Filter 3/4"+Big Separator 500μm. Easy Service. CH 24kW.Brass/ABS

    Without Tax: 39.67 EUR
    With Tax: 48.80 EUR

  • FD095 FERMAG 3/4 Magnetic-Separator Filter for CH 28kW with Wall Boilers. 9000Gs Megnetizer FERDOM
    Quick view

    FD095 FERMAG 3/4" Magnetic-Separator Filter for CH 28kW with Wall Boilers. 9000Gs Megnetizer FERDOM

    Without Tax: 43.45 EUR
    With Tax: 53.45 EUR

  • FD390 STRONG 1 Magnetic-Separator/Hydrocyclone Filter for CH max 40kW. Brass, con. 360 deg. 10000GS
    Quick view

    FD390 STRONG 1" Magnetic-Separator/Hydrocyclone Filter for CH max 40kW. Brass, con. 360 deg. 10000GS

    Without Tax: 71.79 EUR
    With Tax: 88.31 EUR