FERMAG FD360 1" Magnetic Filter-Separator 9000Gs + Condensate Neutralizer for C.H. FERDOM

FD220 FERDOM 2in1 KIT for central heating installations. containing FD168N condensate neutralizer with cartridge for 8/12 months, +

FERMAG FD360 Magnetic Filter-Separator, Magnetizer for Central Heating 9,000Gs. Connection vertical-level 1" FERDOM

- Recommendation - domestic central heating systems with floor-standing and wall hung boilers, maximum system output up to 40 kW, connection 1" GZ,
- Removes up to 100% of magnetic impurities and corrosion products accumulated in the boiler, valves, pumps, etc.
- Removes up to 100% of magnetic impurities and corrosion products accumulated on boilers, valves, pumps, etc. Thanks to the built-in ball settling tank, it also captures non-magnetic impurities and sediments.
- Real magnet power 9 000Gs, dimensions 150x162 mm.

FERMAG FD360 Magnetic filter-separator, magnetizer for central heating. 9 000Gs. Horizontal-vertical 1" connection. FERDOM

- The filter improves the operation of the installation by capturing magnetic and non-magnetic impurities and sediments.
- Contaminants and magnetic deposits are captured by a neodymium magnet and are collected outside the magnet chamber.
- Other contaminants and deposits are captured in the contaminant separator by balls floating there forming an anti-sludge barrier.
- The filter can also serve as a dispenser of inhibitor or cleaning agent for the system. Filling through the vent hole.
- To increase the effectiveness of the magnetic filter we recommend the use of Filter Fluid FD678 penetrating preparation.
- Most boilers manufactured today have very narrow water channels in order to achieve the highest possible efficiency.
- Even the smallest amount of deposits and impurities can cause blockage of water flow in the system.
- Impurities cause, among other things, a reduction in the thermal efficiency of the system, which leads to increased energy consumption.
- Thanks to the FERMAG 360 filter, maintenance costs and the cost of spare parts are reduced by fewer breakdowns.
- Most European central heating boiler manufacturers currently recommend the installation of the Magnetic Filter together with a new central heating boiler.

Installation and operation
- The filter should be fitted with shut-off valves (not supplied). For ease of operation a valve can be fitted in place of the drain plug.
- Cyclic cleaning of the filter (at least once a year) consists in
a) Close the shut-off valves on both sides of the filter.
b) Unscrewing the drain plug and draining dirty water from the filter.
c) Remove the magnet from the chamber and the magnetic deposits will fall into the casing.
d) Unscrewing the cover and removing the ball sediment trap.
e) Thoroughly wash the settling tank and remove sediments and deposits.
d) After the cleaning is finished, follow the steps in the reverse order.
f) Finally, check the tightness of the cover and vent the filter.

Technical data
Product: FERMAG 360 magnetic filter-separator for central heating systems
Model / manufacturer: FD360 / FERDOM
Application:
--For systems: domestic heating, solar, HVAC.
--Application:
---Main: retention of ferromagnetic impurities
---Additional: retention of other impurities and sludge
---Additional: dosing of cleaning preparations and inhibitors
- Magnet: Nominal power 9,000 Gs. 40 cm2
- Magnet type of assembly: in airtight chamber.
- Type of dirt separator: mini ball
- Housing material: PA66G30, polyamide with 30% glass fiber
- Material inner element: HDPE
- Connection spacing: 94mm
- Height / width: 150mm / 162mm
- Connection size: 2 x 1 '' GZ
- Pipe layout: vertical or horizontal
- Diameter of the housing: 99mm
- Case capacity: 500 ml
- Working temperature range: 0-90 C
- Max. working pressure: 3 bar
- Medium: Water, aqueous glycol solutions
- Max. glycol concentration: 30%
- Max system power C.H. .: 24 kW-30kW
- Fitting: on the return of C.H, before boiler.

Technical Information Download
https://drive.google.com/open?id=0BzFhFKO87oADNmFWOGJpNlNPc2s

WHY SHOULD I INSTALL A MAGNETIC FILTER?
Central heating radiators they are usually made of carbon steel, which is highly susceptible to corrosion. Steel pipes or cast iron radiators may also be present in the installation. Black magnetite is formed, which has a magnetic character and can therefore be captured with a magnet. If the magnetic filter does not collect these particles, they will go to the next device with electromagnetic properties; such as a circulation pump and will cause premature wear. They also get into other system components such as valves, heat exchangers, etc., causing them to clog and reduce the efficiency of the entire system. An additional built-in device function is a non-magnetic dirt separator. Contaminants of this type (so-called boiler scale) block heat exchangers, lead to boiler overheating, clog pipes, reduce heating efficiency.

MAIN FEATURES OF FD168N
-The device effectively neutralises condensate / condensate from condensing boilers.
-Suitable for all types of gas condensing boilers up to 35 kW
-Does not interfere with boiler operation or condensate drainage from the boiler.
-Small in size; height 130 mm, can be mounted vertically or horizontally
-Easily replaceable cartridges at least once a year
-Does not restrict condensate or air flow and is therefore compatible with both continuous and intermittent condensate drainage modes.

Installation and use:
-FD168 mounts on the condensate / condensate drainage pipe of the boiler, protecting the environment and sewage systems.
-FD168 uses a special substance in the form of oxide based beads (shaped like balls).
-FD168 can be installed under the boiler both vertically and horizontally. For this purpose 3 connections are included.
-Can be used with all brands of condensing boilers - free standing or wall hung models.

TECHNICAL DATA
Max. boiler output: 35kW.
Length: 130mm (without connectors)
Diameter: 60mm (max)
Connector: 3/4 "(DN20) thread, plug for 20mm pipe
Connection: Push into condensate drain pipe
Mounting: Vertical or horizontal - brackets included
Housing: Transparent (for easy inspection)
Material: Acid resistant - will not corrode
Maximum temperature: 80° C
Maximum flow rate: 3 l/h.
Min. distance from boiler: 180mm
Formula: Based on magnesium oxides, aluminium etc.
Cartridge replacement periodically: Every 8/12 months
Cartridge replacement based on consumption: When the pH at the outlet is below 4,5-5,0
Kit includes: Unit, refill inside 100 Gram, two straight and one angled connector, two mounting brackets, set of screws / dowels, gaskets.

Why install a condensate neutraliser for condensing boilers?
In condensing boilers, high efficiency is achieved by using the waste heat from the hot flue gases to pre-heat the water in the boiler, rather than just discharging it through the flue. However, this cools the flue gases and creates acidic condensate.
The average domestic condensing boiler can produce over 1,000 litres of acid per year at a pH of around 3.5 which adds up to millions of litres of acid produced in each country.
Current guidelines in many countries require waste water to be discharged into municipal sewers and watercourses at a minimum pH of 4.5 (the pH level of acid rain). It is therefore good practice to neutralise it to avoid contamination and corrosion of materials. Using the FD168 neutralises the acidic condensate without harming the installation or the environment.
This is to protect the micro-organisms used in biological treatment processes in the septic tank or local water treatment plant, to reduce damage to the sewerage infrastructure and to help protect the environment as a whole.

Extra refills available - code FD166 / FD169

Information
https://drive.google.com/file/d/1bxvfYKikEV2iHOR0JXgGNQllxVhMOPkc/view?usp=sharing

There are currently no product reviews.

Write Review

The owner of the online store does not guarantee that the published opinions come from consumers who have used or purchased a given product.