‘KAMCO UK’ EVOLUTION CF40 Set: Mobile cleaning unit, 800W, 40L + MI039 magnetic filter, 11000Gs#
The PC208 Evolution cleaning unit of the English company KAMCO effectively cleans and eliminates mineral deposits, corrosive deposits of large ones from heating systems (offices, schools, tenements) as well as from central heating installations in single-family houses. It is also applicable to air conditioning, cooling, solar systems - HVAC. It can also be used for cleaning fittings - heat exchangers, heaters, radiators and industrial machines such as injection moulding machines, extruders, etc.
PC208 Evolution is a special pump-unit with a vertical axis, which combines the traditional descaling function with the function of cleaning central heating systems, including floor systems and other HVAC systems. It is equipped with special shut-off valves as well as a traditional flow reverser and a powerful motor and large-capacity tank. This gives it excellent results in terms of flow rate and pressure. The reverse flow attacks scale deposits from both sides, causing decalcification, particularly fast and effective because the dynamic action of the bi-directional flow, in addition to the normal action of chemical aggression, allows cleaning even when pipes and exchangers are almost completely clogged. The tank is marked with level indicators for easy assessment of the contents. Ergonomic handle for a firm grip, two large-diameter wheels, easy to carry even on stairs., The pump is also equipped with a safety system to prevent damage when operating without fluid in the tank.
Model: PC208 / Clearflow® CF40
Application: HVAC cleaning
Pump capacity: +/- 0.3 m discharge, 25-30 radiators, 400m2 heated area, 2-3 floors
Tank: 40 L, transparent, HDPE
Motor: 1.1 hp, 800W, IP55, 230 V
Max. flow: 90 L/min
Max. lift: 20 m
Max. operating temperature: 75 st C
Reversing type: manual, instant
Valves: 2 x 3-way shut-off and drain
Supply and return hoses: 2 x 5m, 19mm diameter, reinforced PVC
Hose fittings: 3/4" x 19mm, brass, snap-on
Drain hose: 8m, 19mm, reinforced PVC
Supply hose: 8m, reinforced PVC
Overflow hose: 3m, 16mm, reinforced PVC
Other accessories: 2 x hose/adaptor in place of circulator.
Pump dimensions mm: 390 x 440 x 690
Pump weight: 17 kg
Mobility / portability : 75mm castors, built-in handle
Application of preparations: Available-alkaline, acid, chlorine
Manufactured in: United Kingdom
Warranty: 12 months
Included:
1) Unit - pump
2) Transport box 700x450x370 mm for accessories and hoses.
3) Cleaning preparation; DS-15 - 1 Litre per 200L of water
4) Inhibitor: CH-33 - 1 Litre per 200L of water
5) Set of connection adapters.
6) pH test indicator.
7) Instruction manual
PC200 Series User Manual
https://drive.google.com/drive/folders/1pA63JYHTDOUZZLcudptprtOykGNsUn0N?usp=sharing
KAMCO manufacturer's website
https://www.kamco.co.uk/kamco-power-flushing-pumps.html
SERVICE - Spare parts
RECOMMENDED PREPARATES
Cleaning of heating, air-conditioning systems; Preparation DS-50
Cleaning of "damaged" heating systems; Preparation DS-15
Cleaning of water supply systems, etc: Preparation DS-30
Always protect the installation with an inhibitor after cleaning; System Guard
Guide to cleaning central heating installations
-------------------------------------------------
PC300 KAMCO Professional filter for capturing metallic and corrosive deposits from the discharge (up to 2 kg at a time).
Magnet 11,000 Gs, area 200cm2. Accelerates cleaning, protects fittings.
MAG KIT "FERPRO" Magnetic filter forcleaning pumps The kit works with cleaning pumps to remove/filter various types of dirt and deposits - mainly iron oxides and corrosive deposits from domestic and industrial central heating boilers, large heat exchangers, coils, DHW tanks, radiators, etc.
The set may be equipped with an optional heater (PC 301) for heating the cleaning bath. Manufacturer KAMCO, United Kingdom
Technical data
- 11,000 Gs of magnetic power
- Increases central heating system cleaning efficiency.
-Reduces the time it takes to clean the system
- Helps prevent contaminants from re-circulating through the boiler
- Minimises water consumption during flushing
- Reduces the amount of black iron oxide discharged into the waste
- Visible indication of system contamination
Mechanical cleaning is the fastest and most effective way to clean sludge and residual corrosion from central heating systems, using a large flow of water to loosen and eventually expel the debris, usually containing large amounts of black iron oxide, from the system.
Clean water is pushed through the system, pushing the contaminants out in front of it, and this continues until the discharge water finally becomes clean. This can take a considerable amount of time.
The CombiMag was developed to quickly and simply remove contamination in the form of circulating black iron oxide from the flushing water, using the power of a magnet to attract the magnetic oxides.
The CombiMag filter is simply installed in line with any pump/flushing unit. The design directs contaminated water through a high-powered magnetic field so that even the smallest particles are retained on the central magnet, from which they can be easily cleaned during and after the flushing process. Larger particles, which can otherwise lead to clogging of small bore pipes, are also prevented from re-entering the heating system.
Thetime savedon each job by using the CombiMag magnetic filter will quickly cover its cost, and the reduced working time also ensures less disruption to the cleaning process.
The contaminationretained on the magnet is an impressive visual aid and clearly shows the principal what has been removed from the system, confirming the need for flushing and showing that the cleaning has been carried out professionally (see illustration)
-----------------------------------------------------------------
WHY DO YOU HAVE TO CLEAN YOUR central heating systems?
In an era of looking for savings, an increasing number of property managers, communities and housing associations are opting for thermal modernisation. This term does not only mean insulating the building or replacing the windows with modern and airtight ones, but also - and this is often much more important - modernising the existing central heating installation, i.e., among other things, cleaning it chemically and protecting it with an inhibitor against the renewed formation of rust and deposits. Another reason for modernising the central heating system is simply because it is failing, e.g. radiators are not getting hot enough, risers or pipes are blocked, or the system is blocked with air. It is also mandatory to clean the installation before installing a new boiler or replacing radiators.
Scale, sludge and rust are the biggest enemies of installations. After several years of use, a chemical cleaning operation is a necessity in most multi-family buildings or housing estates. This is due to the quality of the water and, unfortunately, to the pseudo-saving measures typical of the Polish reality, which already during the installation phase and the subsequent operation of the installation lead to severe contamination resulting in a loss of efficiency of the installation of up to 30% and more. This is often due to design errors, lack of specialised filters and purifiers and, most importantly, the use of untreated water (i.e. without corrosion inhibitors).
Chemical cleaning makes it possible to unblock existing installations and restore their maximum efficiency. The entire process (depending on the size of the building and thus the central heating system, the type of preparation used and the selected cleaning method) lasts from two/three days (using a 'cleaning' pump) to several days (on-line cleaning during system operation). After the cleaning process, it is essential to protect the system with a corrosion inhibitor, as the process of rusting and "overgrowing" of the system will continue. It should be remembered that the term "corrosion inhibitor" is generally used to describe not only a corrosion inhibitor, but also an anti-sedimentary and anti-bacterial agent. FERPRO's CH-3 and CH-33 have such properties.
PC300 FERDOM COMBIMAG KAMCO_Instruction_GSPR
As of 01.2020,
All technical data are given to the best knowledge of the manufacturer on the date of publication. Subject to design changes to improve the performance of the equipment.
There are currently no product reviews.
Write ReviewThe owner of the online store does not guarantee that the published opinions come from consumers who have used or purchased a given product.
Wielka Brytania
Frogmore
Unit 9, Curo Park
AL2 2DD
info@kamco.co.uk
Polska
Warszawa
Farbiarska 73
02-862
ferdom@britex.pl




.jpg)








