LONGLIFE PC307 "FERPRO" Power Flushing Pump, mobile. 40L tank, 560W, 100L/min, 2 bar.#

Cleaning unit LONGLIFE PC307 effectively cleans and eliminates mineral deposits, corrosion deposits from heating, air-conditioning, cooling, solar systems - HVAC. It can also be used to clean fittings - heat exchangers, heaters, radiators and industrial machines such as injection molding machines, extruders, etc.

LONGLIFE FD307 is a special pump-unit with vertical axis which combines the traditional descaling function with the cleaning function of central heating systems, including floor systems and other HVAC systems. It is equipped with special shut-off valves as well as a traditional flow reverser, a powerful motor and a large capacity tank. This gives excellent results in terms of flow rate and pressure. The flow reverser attacks scale deposits from both sides, causing decalcification, particularly fast and effective because the dynamic action of the bi-directional flow, in addition to the normal action of chemical aggression, allows cleaning even when pipes and exchangers are almost completely clogged. The tank is marked with level indicators for easy assessment of the contents. The ergonomic handle allows a firm grip, two large-diameter wheels, easy handling even on stairs., The pump is also equipped with a safety system that prevents damage during operation without fluid in the tank.


TECHNICAL DATA
Model: PC307 LONGLIFE
Brand: FERPRO
Series: LONGLIFE Model 2021
Application: Cleaning of heating systems, HVAC, sanitary fittings, etc.
Capacity: ≈ 0.25-0.30 m3 water discharge, 25-30 radiators, 380m2 heated area, 2-3 levels
Tank: 40 L, yellow, HDPE
Motor: 0,75 KM / 560W, IP54, 230 V
Max flow rate: 102 L/min
Max Head: 18 m
Max. working temperature: 50 st C
Reversing type: manual, immediate
Re-circulation valves: 2 x 3-way shut-off and drain valves
Pump dimensions mm: 390 x 580 x 930
Weight of pump: 20 kg / with hoses 29 kg / package 31kg
Mobility / handling: castors 200mm, built-in handle
Application of preparations: Available-alkali, acid, chlorine

INCLUDED:
Circulation hoses: 2 x 5m, diameter 1", PVC reinforced, 1 x coupling GW1" / 1 x coupling GW1"
Drain hose: 8m, 1", reinforced PVC, 1 x connector GW 1"
Supply hose: 8m, 3/4", PVC reinforced, 2x 3/4" GW coupling
Overflow hose: 8m, 1", PVC reinforced, 1x 1" GW coupling
Adapters: No
Information: Operating instructions

RECOMMENDED CLEANING SOLUTIONS

Cleaning of heating installations, air-conditioning; DS-50
Cleaning of "damaged" heating systems; DS-15
Cleaning of water supply systems etc; DS-30
Always protect the system after cleaning with an inhibitor; System Guard

Guides
Guidebook on cleaning central heating installations

Cleaning devices - Catalogues and brochures
https://drive.google.com/open?id=1pA63JYHTDOUZZLcudptprtOykGNsUn0N

WHY SHOULD CENTRAL HEATING SYSTEMS BE CLEANED?
In the era of seeking savings, an increasing number of property managers, housing communities and cooperatives decide to carry out thermomodernization. This term means not only insulating the building or replacing windows with modern and tight ones, but also - which is often much more important - modernisation of the existing central heating installation, i.e. its chemical cleaning and protection with an inhibitor against the renewed formation of rust and deposits. Another reason for modernisation of the central heating system is the failure of the system, e.g. underheating of radiators, blockage of risers or pipes, aeration of the system. It is also mandatory to clean the system before installing a new boiler or replacing radiators.
Limescale, sludge and rust are the greatest enemies of installations. After several years of use, a chemical cleaning operation is necessary in most multi-family buildings or housing estates. This is due to the quality of the water and, unfortunately, pseudo-savings, typical of the Polish reality, which already at the installation stage and later in the operation of the installation lead to severe contamination resulting in a loss of efficiency of the installation of up to 30% or more. This often results from design errors, lack of specialised filters and purifiers and, most importantly, use of untreated water (i.e. without corrosion inhibitors).
Chemical cleaning allows existing installations to be unblocked and restored to maximum efficiency. The whole process (depending on the size of the building and thus the central heating system, type of preparation used and the selected cleaning method) lasts from two/three days (using a cleaning pump) to several days (on-line cleaning during the system operation). After the cleaning process, it is necessary to protect the installation with a corrosion inhibitor, because the process of rusting and "overgrowing" of the installation will continue. It should be remembered that the term "corrosion inhibitor" is generally applied to describe a preparation that not only prevents corrosion, but also prevents deposits and bacteriological contamination. Such properties are possessed by CH-3 and CH-33 "FERPRO" preparations.

Status as of 01.2020,

All technical data are given to the best knowledge of the manufacturer on the date of publication. Subject to design changes to improve the operation of the equipment.

There are currently no product reviews.

The owner of the online store does not guarantee that the published opinions come from consumers who have used or purchased a given product.